Sheet Metal Fabrication
SPCC
A fundamental thin-gauge sheet metal featuring exceptional formability and a smooth surface. Due to limited inherent corrosion resistance, a protective surface finish (painting/coating) is recommended.
A fundamental thin-gauge sheet metal featuring exceptional formability and a smooth surface. Due to limited inherent corrosion resistance, a protective surface finish (painting/coating) is recommended.
| Density | 7.85 (g/cm³) |
| Young's Modulus | 190 – 210 (GPa) |
| Tensile Strength | 270 – 410 (MPa) |
| Yield Strength | ≥140 (MPa) |
| Elongation at Break | 28 – 34 (%) |
| Hardness | HB 120 – 160 / HRB 40 – 75 |
| Density | 7.85 (g/cm³) |
| Young's Modulus | 190 – 210 (GPa) |
| Tensile Strength | 270 – 410 (MPa) |
| Yield Strength | ≥140 (MPa) |
| Elongation at Break | 28 – 34 (%) |
| Hardness | HB 120 – 160 / HRB 40 – 75 |