
FDM 재료
PLA
PLA는 FDM 3D 프린팅 재료 중 가장 보편적으로 많이 사용되며, 저렴한 비용으로 빠른 형상 확인이 필요한 프로토타입에 적합합니다.
PLA는 FDM 3D 프린팅 재료 중 가장 보편적으로 많이 사용되며, 저렴한 비용으로 빠른 형상 확인이 필요한 프로토타입에 적합합니다.
PLA는 FDM 3D 프린팅 재료 중 가장 보편적으로 많이 사용되며, 저렴한 비용으로 빠른 형상 확인이 필요한 프로토타입에 적합합니다.
Density | 1.25 (g/㎤) |
Tensile strength | ≥60 (MPa) |
Ultimate tensile strength | 47~65 (MPa) |
Yield strength | ≥88.8 (MPa) |
Elongation at break | 2~8 (%) |
Modulus of elasticity | 2.35~2.7 (GPa) |
HDT(0.45MPa) | 60 (℃) |
Maximum service temperature | 145~190 (℃) |
Thermal Expansion Coefficient | 101 X 10(^-6) (ºC^(-1)) |
Density | 1.25 (g/㎤) |
Tensile strength | ≥60 (MPa) |
Ultimate tensile strength | 47~65 (MPa) |
Yield strength | ≥88.8 (MPa) |
Elongation at break | 2~8 (%) |
Modulus of elasticity | 2.35~2.7 (GPa) |
HDT(0.45MPa) | 60 (℃) |
Maximum service temperature | 145~190 (℃) |
Thermal Expansion Coefficient | 101 X 10(^-6) (ºC^(-1)) |
PLA는 FDM 3D 프린팅 재료 중 가장 보편적으로 많이 사용되며, 저렴한 비용으로 빠른 형상 확인이 필요한 프로토타입에 적합합니다.
PLA는 FDM 3D 프린팅 재료 중 가장 보편적으로 많이 사용되며, 저렴한 비용으로 빠른 형상 확인이 필요한 프로토타입에 적합합니다.
Density | 1.25 (g/㎤) |
Tensile strength | ≥60 (MPa) |
Ultimate tensile strength | 47~65 (MPa) |
Yield strength | ≥88.8 (MPa) |
Elongation at break | 2~8 (%) |
Modulus of elasticity | 2.35~2.7 (GPa) |
HDT(0.45MPa) | 60 (℃) |
Maximum service temperature | 145~190 (℃) |
Thermal Expansion Coefficient | 101 X 10(^-6) (ºC^(-1)) |
Density | 1.25 (g/㎤) |
Tensile strength | ≥60 (MPa) |
Ultimate tensile strength | 47~65 (MPa) |
Yield strength | ≥88.8 (MPa) |
Elongation at break | 2~8 (%) |
Modulus of elasticity | 2.35~2.7 (GPa) |
HDT(0.45MPa) | 60 (℃) |
Maximum service temperature | 145~190 (℃) |
Thermal Expansion Coefficient | 101 X 10(^-6) (ºC^(-1)) |